Specification:
AVR regulator: | automatic | |||||||
Working time at 2/3 power: | 6h | |||||||
Functioning power: |
6kW |
|||||||
Dimensions: | 935 x 535 x 715 mm | |||||||
Fuel: | diesel | |||||||
Fuel volume: | 16L | |||||||
Oil volume: | 1,65 l; 0W30 or 10W40 | |||||||
Max power: | 6.5kW | |||||||
Model: | 192FE | |||||||
Generator type: | 1-phase synchronous generator with brushes | |||||||
Fuse protection: | 24 A | |||||||
Motor type: | 1-cylinder, 4-stroke diesel engine with direct injection | |||||||
Rated voltage (Vmp): | 230V / 50Hz | |||||||
Volume of motor: | 499ccm |
What will you get if you choose our generator?
Super Quite:
The higher the compression ratio, the louder the noise. Our petrol generators with low compression ratio, unlike diesel generators that a compression ratio of 20:1, our low compression ratio engines have lower noise levels
Stable Output:
Stable true sine-wave output with total harmonic distortion (THD) less than 1% and voltage and frequency fluctuation less than 1%.
Long Runtime:
Petrol-powered engines can work hard 24 hours and still outlast any other type of engine for a fraction of the operating costs.
2) More Economy: higher fuel economy and prolonged engine life.
Low Maintenance:
You only need to change the oil and filter every 200 hours
Cost-Effective:
Petrol fuel is the least expensive to run, with natural gas and propane costing much more.
Green & Reliable Power:
Low oil pressure, high coolant temperature, over and under voltage, short circuit, and incorrect battery connection these protections are integrated into each set and ensure long, safe, and reliable operation.
FAQ
Q.What a diesel generating sets basic equipment include?
A.( 1) oil lubricating system;
( 2) the fuel system;
( 3) the control and protection system;
( 4) cooling system;
( 5) exhaust system;
( 6) the starting system;
Q:how to identify fake domestic diesel engine?
A:there is no check certificate and certificate of product, they are diesel engine factory " identity ", is must have.
Check certificate three number
1) the nameplate;
2) the body number ( Physical general in the flywheel end of mechanical machining of plane, font is a convex body );
3) pump nameplate. The three number and the diesel engine on the actual code check, must be accurate.
If there is doubt to this three number factory verification report.