Specification:
Model | A-W400 | |||
MMA/ cellulose mode | OCV | 76VDC | ||
current range | 30A/21.2V~400A/36V | |||
rated current (DC) | 400A | 310 | ||
rated voltage (DC) | 36V | 32.4 | ||
duty-cycle | 60% | 100% | ||
electroder type | E7018 / E6018/E4315/E4316 include cellulose electroder (foxcel 6010 ) etc. | |||
electroder size | Φ2.0- 6.0 mm electroder continous | |||
Arc gouging with up to 1/4″(6mm) carbon | ||||
TIG mode | OCV | 76VDC | ||
current range | 30A/11.2V--400A/30V | |||
rate current (DC) | 400A | 310A | ||
rate voltage(DC) | 26V | 22.4V | ||
duty cycle | 60% | 100% | ||
arc start mode | SCRATCH | |||
MIG/FCAW mode | OCV | 76VDC | ||
voltage range | 15V --40V | |||
rated current (DC) | 400A | 310 | ||
rated voltage(DC) | 36V | 29.5 | ||
duty cycle | 60% | 100% | ||
wire size(flux-cored) | flux-cored wire Φ1.6/2.0 continous | |||
wire feeder type | LN-25 OR miller 12vs OR WF120 (SENCI) | |||
Auxiliary power | Frequency | 50Hz | ||
Phase | 3 phase | single phase | ||
Output voltage/power | 400V AC/16kW | 230V AC/6.9kW | ||
power factor | 0.8 | 1 | ||
Output current | 28.8A | 15A*2 | ||
Engine | Model | V1305 | 4D24G | WP2.3D25 |
make | KUBOTA | YUCHAI | WEICHAI | |
Cylinders | 4 cylinders | |||
type of Cooling | water- cooled | |||
CC(L) | 1.335 | 2.45 | 2.3 | |
fuel | diesel | |||
Output power | prime 19.0kW /standby21.0kW | prime 23.0kW /standby25.2kW | ||
engine Speed | 3000rpm | 1500rpm | ||
Battery Capacity | 80 Ah/12V | |||
Starting & Stop Method | electric start and shut off . Engine start by ignition key , emergence stop | |||
Warning Type | high temperature, low oil pressure, , low fuel level, battary charging failure | |||
Fuel Consumption | 400A OR 16KW AC output | 5.0L/hr | ||
300A | 3.9L/hr | |||
200A | 2.9L/hr | |||
100A | 2.0L/hr | |||
NO LOAD | 1.5L/hr | |||
Whole set | Fuel Tank Capacity | 65L | ||
transport | lift eye and track slots | |||
Protection class | IP23 | |||
insulation class | F | |||
Weight | 520kg | 640kg | ||
Dimension | 1480(L)*800(W)*1050(H) |
FAQ
Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy, Or 100% irrevocable L/C at sight.
Q: What is your lead time?
A: About 20-30 days after receiving advance deposit or original L/C.
Q: What certificates do you have?
A: We have CE, ISO. And we can apply for specific certificates for different countries such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.
Q: What warranty do you provide?
A: One year, during the guarantee period, we will supply free of the easily damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for Genset maintenance.